We have replaced brakes on this loader and now no matter what we do, there are no front brakes. Tried all the obvious. Has anyone else experienced this on this machine?
↧
1990 Case 821 Wheel Loader
↧
Fiat Allis 645B transmission rebuild
Does anyone have any experience rebuilding the TT2421 Allison auto in a 645B wheel loader? Ours is down to barely moving itself under it's own weight. It was pretty weak earlier this summer but now you can't even think about pushing any dirt. Going to rebuild it this winter. Anyone have any pointers? Engine has to be pulled right? After that I've heard it's pretty straight forward to rebuild them. We've rebuilt a C-15 Cat motor, 8.3 Cummins motor, 3306 Cat motor as well as some smaller stuff so I'm thinking we can handle it. Thanks for any pointers or things to watch for guys. What about a good place for parts?
Chris
Chris
↧
↧
samsung120-2 loader brakes
hi all
\got a problem with the brakes or lack of, a scamatic would be good or some pointers in the right direction. worked on cat loaders 20 odd years ago bet nothing since
cheers
blaze
ps thanks in advance
\got a problem with the brakes or lack of, a scamatic would be good or some pointers in the right direction. worked on cat loaders 20 odd years ago bet nothing since
cheers
blaze
ps thanks in advance
↧
Volvo L35B instrument cluster
Hi I'm looking for an instrument cluster for a Volvo wheel loader L35B sn BW5657 2004 year.I'm not sure of the identification number for the instrument cluster but on the board i see 870203-0001b ITT 0406 09153.if it is possible i would like to know the price and method of payment Please contact me at demicv@yahool.com
↧
Cat 936F no brakes
Just bought a 936F,very clean strait loader serial# 8AJXXXXX problem is both brake pedals are frozen solid,no movement at all.Looks like the brake linings are in the differentials.All fluids are very clean and no burnt smell.The brake fault light is on.My question is are the brake treadle valves air over hydraulic? And is it common for these to seize,this machine has sat for a year or so.Are they rebuildable or just replace the whole valve.Is there any adjustment to the brake system?Thanks!!
↧
↧
Hough 65C Running Rough
Hey everyone. I have a Hough 65C Wheel Loader with a Intl. DT407 Engine in it. I have owned it for a couple of years and it has run well except for blowing black exhaust. In the last week it has started to loose power and blow more black smoke at wide open throttle with load. The engine slows and starts to "blubber". This happens intermittently. It has a Stanadyne DB injector pump. The air filter is new as well as the turbo.
Any ideas would be appreciated.
Any ideas would be appreciated.
↧
Cat 936F won't shut down
This loader is new to me.It will only shut down by lifting up on the accelerator peddle.Is this normal.Seems as though the key should shut it down.I now have the service manual for it and cannot find and reference to a fuel shutdown solenoid.Nothing shows up in the injection pump section ether.
↧
case w14 engine took a dump.
the loader currently has what looks like a 336 in it, I've got about 30 4bt cummins some with sae bellhousings already, just wondering if anyone knew if the original flywheel would bolt to the 4bt or if not what other options I had without going back to a case engine, the original block self vented on both sides and would make a good bird house.
↧
930g hydraulic load/noise
Not sure where to look first... when I leave the loader idling with no loads for an hour the hydraulic oil overheats. also when I attempt to start the engine I need to turn the steering wheel to unload the engine so it will start. Thirdly, the bucket tilts twice as fast forward as back. And while the engine is running with no load there's some hydraulic whine like it's fighting itself.???
↧
↧
Terex loader steering is binding/sticking.
Hello, I have a Terex 72-31B loader from around 1978-1982 (not sure) The machine has around 5000 hrs and runs well. The steering has a pretty severe binding/sticking issue. The loader steers fine if you steer very slowly, but if you spin the steering wheel too quickly it will lock up. Once it locks up, the only way to free it is to force the steering wheel in the opposite direction with considerable force. Because of this problem the machine goes down the road fine, but has trouble maneuvering around while loading trucks. This loader does have a large cylindrical accumulator under the cab on the curb side. Does anyone have any thoughts on this?
↧
cat 938g wheel lader
does anyone know how to bleed the fuel system on a 938g loader i would really appriciate your help thanks D
↧
KOMATSU WA380-5 oil levels
We have a KOMATSU WA380-5 year 2004 , 5000 hours , it is out on rent for small cleaning jobs in a cement factory . We regulary inspect and maintain the machine , our problem is that the engine oil level seems to go up and the transmission oil level goes down , there is no external oil leak. Can anybody help ?
↧
New Holland W170B Front End Loader Keets shutting off
Hi All
I have a W170 New Holland front end loader there is full compression on the motor and fuel is getting pumped from the fuel pump injectors are getting fuel but as it starts within 5 seconds the machine just cuts off. what would the possible cause be.
thank you
nicci
I have a W170 New Holland front end loader there is full compression on the motor and fuel is getting pumped from the fuel pump injectors are getting fuel but as it starts within 5 seconds the machine just cuts off. what would the possible cause be.
thank you
nicci
↧
↧
wiper
1996 cat 950f loader Can anyone help with front window wiper work for little bite then goes to far to the right or left and get stuck is there a way to adjust this?
↧
Cat 936F drift
Just purchased this loader #8AJ01502 and trying to get her into shape.But now, I find the machine will not hold itself up.All functions work normal,except the down pressure hold.You can fill the bucket,let it sit over night and it will drift only a couple of inches.But if you lift the front wheels,it will drift back to the ground in a couple seconds.Its acts like there is a check that's not holding. The bottom line is,I't does not drift down,only up!---I should add,the pump makes no noise, all other functions have good power,and speed.And the filter is clear.
↧
Wa 450-6 starting issues
We have a 450 -6 it's starts up runs great shut it off it will crank and crank turn the key off and back on fires up again without issues?.
↧
Heads up for Cat 950/962/966 owners
Specifically 950H/F/K, 962G/H/K, and 966H/K machines. Check out the photo. This is what we found in the transmission screen on a 2011 962H with 4760 hours. I immediately pegged it as the shields from a bearing. What we found was that 2011 & older transmissions have 2 x 6V-1649 Ball Bearings in the planetary assembly. A Service Mag was published in 11/2012 announcing a change in Part Number from 6V-1649 to 379-2185 for this application. The difference between the 2 numbers is that the 6V bearing has plastic shields, the 379 does not. The advice was do not remove the transmission for this reason, the 6V bearing will function fine without the shields in this case.
NOTE: The 6V-1649 Bearing is NOT CANCELLED because it is used in other applications where the plastic shields are required. So if you're working from a paper Parts Manual and need to replace these bearings in this specific application make sure you use the new part number.
Image may be NSFW.
Clik here to view.![Name: 6V-1649 Brg.jpg
Views: 91
Size: 28.5 KB]()
NOTE: The 6V-1649 Bearing is NOT CANCELLED because it is used in other applications where the plastic shields are required. So if you're working from a paper Parts Manual and need to replace these bearings in this specific application make sure you use the new part number.
Image may be NSFW.
Clik here to view.
↧
↧
1997 case 621bxt
My case 1997 621 bxt rubber tire loader will not shift from second to third or third to fourth . Can anyone help?
↧
case w36 engine rebuild
Just about to reassemble a case w36 engine - 504bdti and looking for specs
I need the liner height, headbolt tensions and the bigend cap bolts. This engine was dismantle 6 months ago out in a large farm wshop and is many km from any major centre and the internet is my only source of info
thanks in advance
cheers
blaze
I need the liner height, headbolt tensions and the bigend cap bolts. This engine was dismantle 6 months ago out in a large farm wshop and is many km from any major centre and the internet is my only source of info
thanks in advance
cheers
blaze
↧
Volvo 120H hydraulics
Just ran our new 120H for 8 hrs bucket controls seem to have a delay electric not hydraulic how do I get the same feel as F and E models?
↧