New here, there is a lot of good info on here so maby someone can help me. I have a 60C wheel loader with a transmission problem. Since I have owned it (3months) the trans will loose pressure. Here are the symptoms, when it is cooler out or when the loader has not been run for a day or so is builds pressure and the torque converter seems to engage OK, but if you watch the pressure gauge in the cab say when you are in 1st at idle or moving the pressure will stay good, you can shift to N and the pressure stays good, but soon as you shift into R the pressure will drop to nothing and you have to rev it up to build it again. Once it builds pressure it seems to have plenty of power. It doesen't matter if you are going from R-N-1 or 1-N-R the symptoms are the same. Now it seems to be getting worse, when it warms up 10min or so it dosen't have enough power to push with the bucket down and it will not build hardly any pressure. The oil looks good. Any ideas?
↧