Hello...Its been a while since i posted on my case w24 iam starting to work the loader plowing snow and i have a problem when I use high range to travel faster.It has the allison tt2421 tranny I will describe as best i can whats happening,when i shift to high and apply throttle it has a noticable shimmy it the drive line like the engines running on 5 cylinders a real pronounced jerking like iam pumping the fuel petal then it will seem to engage more smoothly and seem ok,I have changed the fluid with dextron III,changed the filtre thats mounted on the frame and cleaned the sump screen at the bottom of the tranny,there was a small amount of metal shavings at the botton of the case aprox maybe a table spoom full but none in the screen.Any thought on what this could be,It works great in low and reverse but not in high gear.Thanks
↧