Engine over heating in 962H loader,Sl.no:MAL00124
In 962Hloader,the Engine gets overheated,and brake oil pressure low warning light is glowing,fan is also rotating at very low speed.What are the probable causes.Please reply
View ArticleCAT 962G Hydraulic issue wont raise bucket. Have codes
Hey Guys, I didn't see an introduction thread so let this be my first post. I've got a CAT 962G that won't raise or lower the bucket some days:mad: and other days operates fine here are the Codes: 030...
View Article988H Cat lift cylinders and mounting seals S/N BXY00384
Looks like I have to pull both the lift cylinders off this 988H due to seals leaking at the mounting pins, not the rod seals. Figures one seal on each cylinder is leaking! This machine has what Cat...
View ArticleStill a believer
I had posted a topic about snow tires for loaders at the start of the winter season. Some had never heard of such a thing, and were intrigued by the idea, while others scoffed at the notion, and...
View Articlejohn Deere 544h oil pressure light
I have a john Deere 544h. Thus doesn't happen all the time but once in awhile the oil pressure light and alarm will come on. I checked the oil level and it is full of oil. I also replaced the oil...
View ArticleVolvo L330C and Komatsu WA320-5 Wheel Loader
Looked at a couple wheel loaders today. One was a Volvo L330C and Komatsu WA320-5. Both have around 20K hours. Tread is about 50% and everything seems to work fine. A few small oil leaks on drivetrain...
View ArticleClik here to view.
Wheel Loader Radiator part
Dear All, Does anyone know the proper name and the use of the attached part displayed below? Thanks Rgds Nate Soh Attached Images  Â
View Article1977 fiat allis loader wont go forward or backwards
i have a fiat allis 745 (just purchased) after changing all the fluids it will not move forward or backwards. the bucket will go up and down it will turn from side to side but will not move forward or...
View Articlecat 988a poor steering
i have a 988a and steers like a pig I have replaced hyd pump and linkage it steers good wide open but at idle its bad is their any fix like bigger pump any ideas ?
View ArticleL90C third valve
Have a L90c with no 3rd function. There is a 3rd valve already set up but there are no lines or pilot valve in the cab. I read a post about a similar situation in here for a L180D. My local dealer said...
View ArticleOpinions please 966c vs 950f
Looking to buy used wheel loader. These two machines seem to be about the same size. These are the years I can afford. The c models seem to be 10-15k cheaper. Plan on loading trucks in small sand pit....
View ArticleJust a few flakes
https://fbcdn-sphotos-d-a.akamaihd.n...99064003a79416 https://scontent-ord.xx.fbcdn.net/hp...86&oe=5556E5F5
View ArticleClark 175b
Greetings every. I'm new to this site and trying to Learn how to navigate.Excuse me if this question Has been asked before. I'm about to change out The air compressor (air over hydro brakes). The...
View ArticleLooking for Advise on Replacement Loader for IH/Dresser 515B's?
I've have 2 IH/Dresser 515B Wheel Loaders over the past 15 years that have treated me good most of the time but now are getting to the point where they have a lot of wear on them and major parts need...
View ArticleHelp volvo l70c ASAP
Volvo l70c blew 10a fuse in top left of fuse panel and got stuck in neutral, replaced fuse and it worked fine for a day then stopped agian but didnt blow fuse, what do i do, its not mine and owner in...
View Article4th function? Can i disable?
Hi Everyone, Let me give a quick overview. I have a 2011 John Deere 244J compact wheel loader, bought used last year. It has 3rd and 4 th function. We just use during summer months then sits in our...
View Articlemichigan 175a wheel loader 4wd not working
Hello. I have recently purchased a michigan 175a wheel loader, and I'm having a few issues. First issue is that I have absolutely no brakes. I need to rebuild the master cylinder but I live in alaska...
View ArticleCat 938F with 3116 engine with loud knock
Does anyone know of a replacement engine for a 3116 cat in a 938F loader? Ours has a very loud knock like a piston hitting the head. It has a lot of blow by as well.
View ArticleQuick couplers
Guys - have an older Fiat Allis 645B wheel loader that I want to add a quick coupler to for switching from bucket, to pallet forks to bale spear, etc..... I'm going to be fabricating one myself for...
View Article