Clik here to view.
Unknown wheel loader, can anyone identify ?
Found this down in Starbrick, pa. Local block plant. I can't see a name on the back, nor the sides. I did walk around back, but forgot to snap pix. Dashboard is odd, looks to be big long panel with...
View Articleschaeff v51 hydrostatic drive part needed
Hi folks I am trying to help a frind here the hydrostatic driv motor is gone on his schaeff v51 loader anyone know witch part number the rebuilt kit is?? Dealer here is gone so not mutch support....
View ArticleWA-600 won't lift when hot
Have a WA-600 that is having problems lifting bucket when hydraulics are hot. Had hyd pumps rebuilt and changed hyd oil and all hyd filters. Lifting issue did not change. Any ideas?
View Article966c rear differential specs
Could somebody please help, I need the specs for rear differential o a 966C. Backlash and any torque specs I may need. We lost the spider gears and have another carrier and need specs and advice to...
View ArticleFaresin Haulotte 10.30 High-low gears
Hello. I have faresin haulotte 10.30 2006 years old and problem is high low gears. one time i working and second (high) gear is gone.. i'm trying to find a problem abou 2weeks.. i can't find anything.....
View ArticleJD644B steering
Have a 644b that when cold will steer ok, but when hot it will not steer to the left. Right cylinder is reading 134 front and 134 rear of cylinder, left cylinder is reading rear 134 and front 104...
View ArticleVOLVO L120F expert
Hi everyone, I have question about my wheel loader l120f the machine was working perfectly and suddenly it's stop, all functions are fail only the engine is working other hydrolic systems fail no...
View Article938 g wheel loader problem
Dear all I have a 938 g wheel loader, year is 1999. Before few days, the machine stopped moving forward and backward. We tried to see the damage by using the computer, but no damages were recorded....
View ArticleDeere 244E loader trans
I have a john Deere 244E wheel loader that when machine reaches operating temperature the transmission looses power and starts to slip. Seems to do both in high and low speed. Just curious as to if...
View Article644H trans sluggish
I have a 644H will not pull its self in drive or spin wheels when pushing in first gear. Changed fluids and filter. Looking for pressure specs
View ArticleBroken, stuck, stripped and boogered wheel studs on a 644 JD
So, we got the 644 all blocked up, a little high but nice, tire guy was removing the wheel bolts and I'm watching what hits the bucket, one with no threads, four fine thread ones, a couple course ones,...
View Article988f series 2 diagnostic connector
I cant find the diagnostic connector on s 2zr2100 988f anyone got any ideas ? Thanks
View ArticleVolvo L220e won't start
I have a Volvo l220e that will not start. Only error is reduced computer function. All fluids good. Before it stopped working, it shock and white smoke came from exhaust. Paid Volvo 600 to come down...
View ArticleCat 960f
Anyone have experience with this machine? The reason I ask, is because they are cheaper priced than most 950's I've seen. Was this model a lemon? Or hard to get parts for? And I haven't seen many...
View ArticleMichigan 55C JAM NEED HELP
Good morning all. I got a mid 80s clark Michigan 55c. I bought the machine from a local, honest guy. Engine was removed because bad torque converter. The stator, shells, I mean everything was toast....
View Articlewa320 3rd function for plow
Want to install a diverter valve in a 1995 komatsu wa320 for a snowplow. We have diverter valves tied into the curl lever in a couple other loaders with a push pull cable that work well. I came across...
View ArticleCat IT38G transmission fault
I recently bought a Cat IT38G 7BS series, which I discover has a transmission fault. I have very little history other than new wiring harness and solenoids have been fitted in the transmission area...
View ArticleOngoing 644E repairs, fun and more fun!!
Well, got the axle out, a Kubota M7040 with forks won't lift a 644 axle, so its over 2000 pounds but it curls it easily, so I'm guessing around 2200 pounds, One axle stub was good looking, nice and...
View ArticleJohn Deere 544H ?s
I am going to look at a John Deere 544H with 27XX hours to purchase for utility work. Does anyone have experience with this model and what to look for on them besides the normal pin wear and engine...
View Article