Napco tractor 4x4 4 wheel steer 1960's
I am looking at a NAPCO tractor 4x4 4 wheel steer bucket on front backhoe on the back. Detroit Diesel is the engine. Tractor starts and runs BUT doesn't move ----TORQUE CONVERTER?????????????? What...
View ArticleDeer 624K
Not sure if this is right forum but we got a new, well used but new to us, 2011 Deere 624K wheel loader back in August, awesome machine for sure. We love it. Few pics of it...
View ArticleJd 444E slow high speed...
We have a Deere 444E wheel loader with about 5000 one owner hrs on it, it has had a relatively easy life and doesnt get used hard or often. It seems that when we travel on the road with it the high...
View Articlemichigan loader 75
its been noted that one of the levers for the transmisson is for work /travel(lever on the floor board) my question is - does it more or less take it out of 4 wheel drive-for the travel aspect-or does...
View Articlemichigan 75III loader convertor
i was able to get these numbers off the torque convertor today---c273-62---serial # 85b701---tag also says bower"s rebuilt... can anyone tell me a bit more about it? it has 3 pumps on the...
View Articlemichigan 75bIII loader brakes
can anyone tell me for sure if the brakes take brake fluid or hydraulic oil? there is disk brakes on this machine.
View ArticleCase loader interest
Hey. I currently have a model year 2006 Volvo L90E wheel loader. Here in Finland, Volvos I think it is overpriced. I am tempted to switch to newer wheel loader. Because Volvos are expensive, I'm...
View ArticleClik here to view.
Cat Introduces new model - 986H in China
It appears Cat has introduced a "tweener" model between the 980 and 988. This tractor looks to have 405HP, weighs about 93,500 lbs and has between a 7.0 and 8.0 cu yd bucket. Check out the press...
View Articledeere 544G locked up
we have a544G that we used behind our shop,we shut it off and came back later to put it away and it will not move at all . the park brake is not locked and it shifts into gear.. it must be the brakes...
View Article1983 furukawa fl170a
Hi all,new here,what a great site,been looking for specs on one of these but can't seem to find any,like what sort of tranny and are they worth fixing,it has no drive when in any gear?any help...
View ArticleCAT 980H Fuel Consumption
I'm looking at buying a 980H with a RH bucket for stockpile and re-handling work at a quarry, can anyone give me some indication of the expected fuel burn per hour? Ideally looking for figures from...
View Article721
I have a 1994 Case 821B loader. It is leaking hydraulic oil quite profusely outside and underneath the cab floor directly below the valve controls higher up in the cab. The oil leaks out of a small...
View Articlemichigan 75b loader brake valve -quicker fix
just in case anyone else has the same problem- the brake petal valve on my 75b loader project was leaking so bad that the machine couldn't build up pressure-- so i got the bottom parts out and went to...
View Article48 Hours with a Volvo L110G
Hello fellow HEF members, Thought I would share my opinion/s after a 48 hour demo/eval of a brand new Volvo L110G. First, I have to say it was a VERY impressive Wheel Loader. On the project we are...
View ArticleJD 644J loader I NEED HELP PLEASE!
Hey Guys..new here and glad I found you. Here's my story. The owner of the ranch I manage brought me out a JD 644J to clean silt out of dry tanks [ponds]. It had only 2205 hrs, clean as a whistle with...
View ArticleCat Command Control Steering?
Looks like we are approved for a new wheel loader purchase.:D We have 99% decided on the new Cat 950K Power Package model. Loader will be used in a composting operation where we use it to stockpile...
View ArticleClik here to view.
michigan 75b loader de-clutch
can anyone tell me the if i am right in the operation of the torque convertor/transmission de-clutching. after building air pressure if you put the machine in gear and step on the brakes should not the...
View ArticleClik here to view.
michigan 75b loader trans oil
i dropped the oil out of my loader--took out the screen-- and discovered----oil looked to be only hydraulic oil, no atf at all- and enough metal shavings to warrant some conserns. i cleaned out the...
View ArticleBOUGHT A DO-MOR tractor today
4x4 -- and 4 wheel steer Detroit Diesel--bucket on the front and a backhoe--case--on the back. Also comes with a VERY heavy duty rear blade with 4 hyd. cylinders on the rear blade.. I don't know much...
View ArticleAny one have experience with Rippers on a wheel loader?
Hey guys Want to hear from the people who have fitted or used rippers on the back of a wheel loader before in australia CAT used to offer this seems they are not offering it any more , what do you guys...
View Article