Cat 950f falls out of second gear?
Working on a 950f loader that has me stumped. Occasionally when shifting into 2nd, the loader doesnt seem to engage the gear. i can flip the neutralizer switch up and back and then she goes. happens in...
View ArticleTrying to find a cheap way to sift rock with A Cat 950F
Hello, I am trying to find a way to separate the fines from the larger rocks with a Caterpillar 950F with the beales quick coupler. I haven't found much luck finding a sieve bucket and I am going to...
View ArticleDart 600C
Can anyone point me to where I can find complete specs for a Dart 600C wheel loader. Thank you in advance for your time.
View Articlehow much refrigerent in case 321d a/c system
anyone have the accurate spec for this compact loaders a/c system?
View ArticleVolvo L90..is there a tool carrier model?
looking to compare the 721F XT to the L90. Does Volvo make a tool carrier in this size?
View ArticleCase W11 Wheel Loader Electrical issues
Howdy- I'm a new guy to the forum and don't know my way around here to well, so I hope i am doing this in the correct manner- I just bought a Case w11 loader. Needs a little work, but a fairly good...
View ArticleJust bought a 1974 CASE 680E
I just bought a 680E, and it has a few issues First it dosn't go forward or reverse after it heats up. I was told this is a shuttle shift issue. Does anyone know where I can get a shuttle shift rebuild...
View ArticleCase 121b
Hi there, i am considering buying used loader case 121b it is small articulated loader, so i would apreciate if some good soul have any experiences with that machine to write here his opinions, good...
View ArticleFr 15 b
I have a FR 15B Fiat Allis that only wants to go forward even in reverse and then blows the neutral safety switch breaker. Can someone help me with this. Thanks Dan
View ArticleHough 65C Tranny Issue
Hey guys love the forum. I have a Hough 65C that I am restoring for use around my property. The issue I have is that the drive shaft from the torque convertor spins slowly or stops when I first start...
View Article966 loader throttle shaft
I've got a 966 loader that has been sitting about a year and the shaft going into the pump will not move forward to advance throttle! It does however move to the stop and run positions. Is it possible...
View ArticleBad experience !!!! Hyundai wei chai engine
i bought an SL 760 Hyundai shan dong in dec 2012 after 650 hours approxymatly , it started consuming engine oil we brought it to Hyundai , they open the engine and found one broken segment and all...
View Articlesearching for case w20c bucket teeth/shank replacement alternatives
hi all, needing new teeth and possibly shanks for my case w20c wheel loader. i added five new teeth/shanks in 2004, and the teeth are well worn. i purchased them new from oct case. hoping to find a...
View Articlehough cm 60 hydraulic problem
Hi I just tried out a loader we bought last week and after loading 2 trucks the hydraulics died, my son was leveling out some gravel not working it hard and it was like some one shut the hydraulics...
View ArticleThe fuel goes where?
A couple of weeks ago my Cat 924f loader develops a hydraulic leak on the job and must have lost quite a bit of oil as the level was no longer visible in the sight glass. Fixed the problem and went to...
View ArticleOn your mini loader Open or Closed?
G'day guys Just wondering on your little loaders do you guys prefer open or closed cabs? I have been hearing arguments both ways some say for a mini loader that you dont really do enough work in one in...
View ArticleCase W20B head gasket set
I recently purchased a W20B loader with a 401B engine in it. The freeze plugs on the heads are leaking, I could pull the middle one off and be able to get to all of them, but have not been able, just...
View ArticleDeere 624K loosing seal between tire and rim
Hi, having problems with slippage between tire and rim, machine has the original tires and rims installed, tried cleaning the rim, checking for damage, can't seem to find anything, also tried inflating...
View ArticleCase 580L Forward & Reverse issue
I have a 580L with 2200 hrs on it. I bought it in 99 with 1000 hrs on it. Been working great till last 4 months. After starting it, I have no FWD or REV action for a few minutes till it seems to warm...
View ArticleClik here to view.
Komatsu WA270-3 joystick control
Hi, Dear users, I need help - i'm looking for joystick control for Komatsu WA270-3 2002 year, in Komatsu service this part is too expensive... I'm looking for a new one or used in good working order,...
View Article