Clik here to view.
Clark 55C Loader
A friend of mine is thinking seriously about purchasing this Clark 55C Loader & I wanted to ask if anyone could give us the build date on it based on the ser# 481B285CB? Attached Images  Â
View Articletrojan 1900z
Im working on a 1900z for a friend of mine, and like most trojan loaders it has no brakes. I have air at the master cylinder all the time, i am unsure if this is correct. if i disconnect the air line...
View ArticleNeed Advice on a Michigan 125B
Thinking about a larger payloader than the the Case W-11 I've got, I'd like something in the 5-7 yd range. I've found this machine that is certainly cheap enough,...
View ArticleWa320-5 komatsu wheel loader
Hi my name is Herman. I work for Diesel & Dyst earth moving As a diesel mechanic. Wr have a old Wa320-5 loader it made a short and burned a wire harness. I replaced it. Now is stays in second gear...
View Article544d roll on forks
Looking for roll on forks seven or eight foot for a 544d John Deere - bucket has attachments in place. Thanks.
View ArticleClik here to view.
Trojan 1900 Torque Converter Leak
I have a Trojan 1900 with a Clark C272 torque converter that continues to leak into the engine flywheel pretty severely. About 1 gallon every 4 hours. I have replaced the oil baffle seal and o-rings...
View ArticleWhats a Case 921 like?
I need a 4-5 yard loader for loading truck and moving material around for about 250 hours a year. I found a mid 90s case 921 that fits my budget. Were they a good loader or were they trouble?
View ArticleLate 90's High Houred Cat 966G Any Good?.....or stay away from it?
In the market for a good used loader to dig out and load corn silage on a dairy farm. Will only be used for about 3 hours on daily basis. Found a Cat 966G with about 25,000 hours. Most seem to be...
View ArticleTrojan 114
Just purchased a rusty but trusty oil Trojan loader and am having troubles finding info. My tag says model 114 but no year or anything that I can find. I ordered a manual which from eBay and am...
View ArticleDresser 550 and 555?
Is there any major differences between a 550 and 555 Dresser? Is one more reliable than the other and do both have about the same parts availability and operating cost? I'm aware the 555 weighs about...
View ArticleHyundai HL770 has no 3rd or 4th gear
Hi All- I'm new to the site and figured no better place to get some insight. I just recently purchased a 1996 Hyundai HL 770 with around 10,000 hours on it. The transmission has some issues. Some I...
View ArticleHyundai wheel loaders reliable?
Found a local hl780-3a and was wonderint at 11k hours do these still hold up? Has a cummins engine so im not too worried about that but how about the transmission, axles, pumps and the rest? Thanks
View Article344h or 444g
sold my case 321d and will need to replace it ,Im looking at a 444g with 6000hrs and a 344h with 1700 hrs, both look about right for the hours they have but the H is newer and $10k more. I was trying...
View ArticleCase w-20B wheel seal
Has anyone changed out a wheel seal on a case w-20B? im reading through my parts book and it shows the seal and a wear sleeve. The book isnt too specific but it almost shows as three pieces. When i add...
View Article93 Deere Loader Park Brake irratic
`1993 544Gkk DW544GD552404 Parking brake "sticks" randomly. Operator can be traveling and parking brake will activate. The last few weeks, the operator has had to toggle the switch on and off so we...
View Article2005 caterpillar 950gII
Hello. I am working on a caterpillar 950g. It had a bunch head issues that are fixed now. But the loader will not fire. We've put a new injector wire harness on timing sensor oil pressure sensor. Two...
View Article980h harsh shifting
Hi all , after advice regarding harsh shifting of our 980h serial number mhg06517 . From 1-2 harsh from 2-3 not to bad from 3-4 fine going down 4-3 fine 3-2 harsh 2-1 fine . Carried out fill...
View ArticleLuber-Finer oil fillter------------------NEED HELP
I have this old tractor---M R S---Mississippi Road Service. It has a canister type Luber-finer oil filter--the filter element is 15 inches high. I removed the filter and the two rubber hoses on the...
View ArticleTcm 860
Does anyone know if the cylinders for lift, tilt, and steer are metric or standard sizes on this machine?
View ArticleMichigan 175b Slow
We bought a 175B Michigan Clark wheel loader S/N: 427C167, and we have used it a little bit around farm in the last 3 years, but now we started it today after sitting for 5 months and are having...
View Article