I have a 930G w about 7000H on it, it has no ride control, was an intermittant issue until recently. You can lift the loader arm all the way up and when you go to lower the arm it goes about 2 feet and acts like it's deadheading, it still moves very very little if you let off the handle and lower again it does the same thing all over again,with this problem it drifts while running or not pretty bad you can see it drifting down so it pretty bad. I checked the springs on the spool, removed the relief valves and inspected and found nothing, eliminated the joystick pilot valve by switching lines around the issue stayed with the lower function, I gonna check the cylinders tomorrow, any where else yall would look, steering priority valve? or something like that, its just on lower this is what confusing me, Any help would be great.
↧