New to Us we have a 2007 JD 444J, Does: the Bucket level sensor and the boom height sensor work together, Boom sensor was disconnected, re connected no change,any checks that I can check manual on order. Thanks
↧
Jd 444j Boom sensor
↧
Cheap Coupler Upgrade?
Hi all, I have a Cat 928G with a pin on 3 yd bucket. What are my options for upgrading to having a coupler. I understand I need to make adjustments to my current bucket to fit onto the coupler. A JRB hydraulic coupler costs $5800. Are there any non-hydraulic but rather manual couplers? I know there are some for excavators. Ultimately I'd like to have my current bucket, a light material 5 yd bucket and forks at my disposal. I don't want to spend 20-25k on all that. Thanks for your advice.
↧
↧
Looking to buy a Loader. Advice?
Looking to buy an older loader for moving rock and dirt on my own property. Found a few old John Deeres ranging from 444b, 544a, 3 644s and a 94 Case 621b. Case is newest with lowest hours but has trans issues. Owner thinks it needs rebuild. From what I have researched it may be electrical. 444b is at local dealer and is ex municipal with forks, quick attach and new tires and chains. 544a is an old farm machine that looks like it was restored and hasnt seen much use since 1990. 644s range from late 70s to late 80s. 2 need work. Diff troubles. Newest one seems good but long haul (cost) to bring home. Leaning toward the case. Second cheapest, newest and may be not bad to fix. 444 may be too small lifting wise for what I want to do. The 544 while looking nice may just be too old. 644d seems ok but very far away to look at and has 15K hrs+ on all original components with newer pins. Any thoughts from those of you with experience? This would be my first loader. Repairs dont scare me unless the Case needs a new trans(big$). TIA
↧
CAT 966E parts book
Hi, Friends please help me with a parts book of CAT 966 E machine, if somebody has it in PDF or any other form please upload it or mail me on nawaz77s@gmail.com. thanks guys ....cheers....:salute:salute:salute
↧
wheel loaders agricultural farm breeding farms
What do you think of industrial machines for agricultural use? which in your opinion the best? What do you think of the caterpillar 924 K ag handler? is a good machine has good performance, compared JCB Komatsu John Deere, where the best, thanks to the next aspect opinions
:confused:https://youtu.be/gh0g_mdmvQI
https://youtu.be/6jfp2MThJh8
![Name: wheel_loaders-926_m-caterpillar(1).jpg
Views: 22
Size: 64.4 KB]()
![Name: 2651099634_small_1.jpg
Views: 23
Size: 65.4 KB]()
![Name: IMG_6646Copy.jpg
Views: 24
Size: 46.5 KB]()
https://youtu.be/Y7cl9JSv8vk
https://youtu.be/aHFNaybpGb4
:confused:https://youtu.be/gh0g_mdmvQI
https://youtu.be/6jfp2MThJh8
https://youtu.be/Y7cl9JSv8vk
https://youtu.be/aHFNaybpGb4
↧
↧
Michigan 55B forks?
I would like to find a fork set for my 55B
Anyone know if any other model loaders would pin up to mine?
Or will I have to make something fit?
I don't care for the fork bucket set-up.
Thanks in advance!
Anyone know if any other model loaders would pin up to mine?
Or will I have to make something fit?
I don't care for the fork bucket set-up.
Thanks in advance!
↧
Case 921c Brakew parts
Im looking for brake frictions and steels for my loader. Dealer says only an upgrade kit is available that costs alot of money. Im trying to find the original pieces from surplus or cheaper upgrade,The loader has ZF axles.Any info on parts or an American ZF dealer would be appeciated.
↧
200 cat 938g value?
What is a wheel loader like this worth? I know the history. 14,000 hours. Engine over haul 1200 ago. Tight machine. No coupler, cab, ride control etc
↧
Loader tire size interchangeability
Have a Case 621B loader and it has 20.5-25 tires on it. I have 2 new sets of tires but not that size. I have a set of 17.5-25 which I have also seen on this size of loader and I have a set of 23.5-25 tires. Will either size of these tires fit on the current rims. Tires currently on are Michelin but have lots of tread and case age cracking and the others are new tires. would like to fit the larger ones if I could. Have lots of clearance to fenders.
↧
↧
Case 621D 2007 Problem with Brake Clutch.
hi,
I have a problem with my 621D 2007.
When i operate the bucket and hold the brake pedal, the transmission dont disengage. Try to raise the rpm and it still want to move. Temperature raise like hell in the front and rear brakes.
Look around in the parts catalog, dont find anything about the Brake clutch system.
Case use a different name for that ? any picture, advice info, data, whatever to help me ?
Thank you !
I have a problem with my 621D 2007.
When i operate the bucket and hold the brake pedal, the transmission dont disengage. Try to raise the rpm and it still want to move. Temperature raise like hell in the front and rear brakes.
Look around in the parts catalog, dont find anything about the Brake clutch system.
Case use a different name for that ? any picture, advice info, data, whatever to help me ?
Thank you !
↧
Cat 980g loader problems
I have 980 g. 2kr01589. Got the machine this summer and have not had real good luck so far we put 32 hours on it and the motor locked up so we got that back together and now I can not get the loader to function right. Take 3-10 seconds before it will start to lift the bucket or curls. Loader arms will lower right away to the ground but then takes the same amount of time to pick the front end of the ground. At a idle when you bottom ou the hydraulics it will stall the motor. I have check the hose clams a couple times on the suction lines. And I can sit and press the brake pedal for a minute and no pressure lights came on the dash. The only other thing that I can think of is that after it sitting for 10 minutes the oil level goes up in the hydraulic tank and when you come back th next day it will be full all the way to the top of the filler cap. Normal or not? Any ideas where to go from here thanks
↧
Boom suspension trouble l180f
I have a weird problem with the volvo l180f 2008
When i activate the boom suspension system the boom start lowering itself.
Anyone have some ideas what can be wrong?
When i activate the boom suspension system the boom start lowering itself.
Anyone have some ideas what can be wrong?
↧
Pettibone 285-AD problems
we have a Pettibone 285-ad and need help with brake problems AND transmission oil pressure....we know nothing about this kind of brake system...
this thing has set for several yrs and the motor starts and runs and the hydraulics all work very well
we have no brakes can anyone tell us what to look for first? the air pressure is very good the left hand foot pedal stops the transmission but will not activate the brakes. The foot pedal beside the accelerator spits out a burst of air when activated just like other loader with air brakes..
I am sure after we get these 2 problems fixed we will have other problems along the way
also we sure would like to find a manual or PDF file that is a manual for this machine
waiting to hear from anyone.
Kyle
this thing has set for several yrs and the motor starts and runs and the hydraulics all work very well
we have no brakes can anyone tell us what to look for first? the air pressure is very good the left hand foot pedal stops the transmission but will not activate the brakes. The foot pedal beside the accelerator spits out a burst of air when activated just like other loader with air brakes..
I am sure after we get these 2 problems fixed we will have other problems along the way
also we sure would like to find a manual or PDF file that is a manual for this machine
waiting to hear from anyone.
Kyle
↧
↧
Volvo Wheel Loader DPF Solution
After chatting with several of the farmers on this forum & much research we found a guy to eliminate all the DPF issues on Volvo Wheel loaders and other equipment . He's saved our equipment & fleet. 940 353 7278 . They don't get hot anymore afterwards either nor Regen .
↧
1963 Hough H50B Parts Availability
Hello heavy equipment dudes. I have a old 1963 Hough H50B wheel loader. I've been searching and searching for a place that could be a parts connection for me for this old machine but have had no luck. What have you all done over the years with your Hough loaders? Are there still parts available? Or is everyone jury rigging everything and hoping it works and can get it through another year. Please tell me what you all have done with your Hough wheel loaders, since Hough went out of business long ago. Thanks.
↧
Caterpillar IT38G 4th gear lock out?
Hello, I have just acquired an IT38G wheel loader/tool carrier. It drives and operates well. has about 16,000 hours on it.
But I cannot get it to move into 4th gear. ( forward or reverse)
Its strong in all other gears, and moves quite smoothly up and down. But rev it out in 3rd, click to 4th and it just stays in 3rd.
I am wondering if it may have had a lock out set up for 4th as a safety precaution in its last life.
If so how do you reverse this?
thanks in advance.
But I cannot get it to move into 4th gear. ( forward or reverse)
Its strong in all other gears, and moves quite smoothly up and down. But rev it out in 3rd, click to 4th and it just stays in 3rd.
I am wondering if it may have had a lock out set up for 4th as a safety precaution in its last life.
If so how do you reverse this?
thanks in advance.
↧
Help me pick a loader for my application.
I have a stump dump/Mulch Yard. I need a loader to pile the brush and stumps and to load Mulch/compost/dirt. I need to be able to pile brush and stumps as high as possible. Also need to be able to load a dump trailer that is about 12' tall (I might build a ramp to load trailer) I was thinking about a brush grapple to stack brush and stumps, so I would want a hydraulic coupler and aux ports.
I also do grading/excavating, but do not have a detach, so 10.5' cab height would be max I could haul with my tilt top. I would use it occasionally on grading and clearing jobs when it wasn't too busy at the Mulch Yard.
Was also considering a snow plow to plow mountain gravel roads. I have about 15 miles of road to plow.
I see a lot of Komatsu wa250-5 loaders going for about 35k with under 10k hrs...are these good machines? Any others to look at for around $35k?
I also do grading/excavating, but do not have a detach, so 10.5' cab height would be max I could haul with my tilt top. I would use it occasionally on grading and clearing jobs when it wasn't too busy at the Mulch Yard.
Was also considering a snow plow to plow mountain gravel roads. I have about 15 miles of road to plow.
I see a lot of Komatsu wa250-5 loaders going for about 35k with under 10k hrs...are these good machines? Any others to look at for around $35k?
↧
↧
Loader Comp Test Help!
I have to take the Journey Comp Test on a Cat Loader this week, I need to build a ramp that leads into a 20 x 30' pad that's about 2-3' in depth. Building the ramp is the easy part and I know to build out beyond the stakes, but I'm not real confident on how to go about spreading the material from the ramp out. My thoughts were to dump just at the edge of the ramp until I have enough to level my bucket and push it a bit, dump and continue. Any suggestion? I also have to wheel roll the whole thing and try to match the grade to the stake ribbons.
Thanks so much!
Thanks so much!
↧
case 621 plain with zf trans how to check transmission
I had a couple pf the shift lines leaking replaced them I called dealer about oil and do you check it running and warm or off warm or cold they hand to ask 3 guys and they said running warm just want to verify it it almost seemed like they didn't know
↧
Cat 950
I have a CAT 950, It has been setting for some time and when I went to move it I put it in forward or reverse and it wouldn't move, in Neutral it moves forward. The linkage seems to be set right. Anyone have any suggestions what to check or adjust?
↧